M1A0 / M1AA microCARD
MicroCARD memory cards with UHS-I interface are ideal for modern devices. The fast UHS-I interface allows you to take full advantage of modern smartphones and tablets, and the adapter included in the M1AA set allows you to use your microCard also in devices with an SD card slot.
Depending on the production batch, the actual appearance of memory cards, card reader or packaging may differ from that shown in the picture.
Fast UHS-I interface
The use of the fast UHS-I interface allows to achieve good performance – read speed up to 100 MB/s and write speed up to 10 MB/s. This has a direct impact on the quality and reliability of performing functions such as burst-mode, slow motion, time-lapse or 4K recording.
It comes with an adapter
The adapter included in the M1AA kit, increases the functionality of the microCARD. Thanks to the adapter, the microCARD can be used in cameras PCs and laptops with an SD card slot.
UHS-I interface is backwards compatible with devices supporting SD 2.0 standard. In this case, memory card will work with the minimum operating parameters related to the Class 10 speed (min. 10 MB/s).
UHS-I microCard (16, 32 GB) is compatible with devices marked with High Capacity (HC) and eXtended Capacity (XC) symbols.
UHS-I microCard (64, 128, 256 GB) is compatible only with devices marked with eXtended Capacity (XC) symbol.
Speed of operation
read: up to 100 MB/s
write: from 10 MB/s
0 - 70°C (recommended)
-25 - 85°C (recommended)
Operating and storage humidity
30 ~ 85% (recommended)
Powered from the device
15 x 11 x 1 mm
103 mm (width) x 123 mm (height)
Weight (with packaging)
M1A0: 8.3 g
M1AA: 9.5 g
|Dimensions||H: 12.2cm x W: 10.3cm x D: 1cm|